Home >> Builder Resources >> Silverline Vinyl
Window Warranty
WARRANTY -
Residential Vinyl Window / Door Warranty
1. Subject to the terms and
conditions stated herein, the manufacturer warrants to the Original Purchaser that under
the conditions of normal use and service, all window and/or patio door products, including
mechanical parts and insulated glass, will be free from the following defects in material
and workmanship for the lifetime of the product:
- Vinyl products will be free
from blistering, peeling, flaking, rotting or corrosion.
- There will be no material
obstruction of vision on the internal surfaces of the insulated glass unit caused by
sealant failure of the insulated glass unit.
- Component parts will be free
from any and all manufacturing defects.
In the event that the
Original Purchaser experiences a problem with respect to any of the defects set forth in
Section 1a, b or c above, a new replacement part will be provided upon receipt of the
original part or validation of the complaint. The manufacturer reserves the right to
require return of the defective part(s).
2. The warranties described above cover only manufacturing defects and do not include
defects or damages caused by, or as the result of, any of the following circumstances:
- The improper installation or
use of the product or products by the Original Purchaser, his agents, assigns or invitees.
- The improper application or
use of the product.
- The occurrence of accidents,
vandalism, fire, floods, acts of God including, but not limited to, earthquakes and
hurricanes.
- Any modification or
alteration to the product.
- The failure to perform
reasonable and necessary maintenance on the product or products.
- The neglect, abuse, improper
handling and/or improper storage of the product.
- Exposure of the product to
excessive heat and/or cold beyond naturally occurring conditions.
- Stresses caused by building
defects or settlement or movement of the structure in which it was installed.
- The application of harmful
cleaning solutions or products including, but not limited to, acetone, petroleum products
or abrasive compounds.
- Misalignment of
grilles/muntins of 1/8" or less from appropriate position.
- Slight fading and/or color
variations caused by normal aging or weathering.
- Torn or ripped screens for
any cause whatsoever.
- The improper removal of any
permanent warning or identification labels from the product or products.
- The rusting or corrosion of
non-vinyl products or components due to the close proximity to coastal areas unless the
product is composed of appropriate stainless steel or other non-corrosive hardware.
- Installation of the product
or products outside of the 48 contiguous United States.
- Any inappropriate or
unintended use or uses of the product including, but not limited to, any commercial use.
3. With respect to insulated
glass product, the above warranties cover only manufacturing defects related to the
insulated glass unit and does not include defects or damages caused by, or as the result
of, the following circumstances:
- Minor blemishes in the glass
that do not significantly impair the structure or vision through the glass including
slight glass curvature.
- Color variation or variations
of the glass.
- Glass breakage for any cause
or any reason.
- Subjection to stresses
arising from glass surface temperature differentials or caused by building settlement or
movement.
- Condensation on the external
surfaces of the window and/or glass, which may occur as the natural result of humidity and
interior/external temperature differentials.
- The transportation or
installation of the glass product or products at altitudes in excess of 3,500 feet above
or below point of manufacture unless equipped with capillary or breather tubes.
- The very gradual, natural
migration of inert gas infills used in insulated glass units.
- Improper application,
alteration, modification, or use of the insulated glass units, including the application
of aftermarket films.
4. For quality assurance
purposes, all window and patio door products should be of title inspected by the Original
Purchaser prior to, or at the time of installation or upon transfer to the Original
Occupant.
5. The warranties set forth above are expressly in lieu of all other expressed warranties
and of all other obligations or liabilities on the manufacturer's part. The manufacturer
neither assumes, nor authorizes any other person to assume for the manufacturer, another
liability in connection with the sale of the product. The warranties as described herein
are the exclusive remedies for breach. There are no warranties that extend beyond the
description on the face of this document. The manufacturer makes no warranty whatsoever
with respect to accessories or parts not supplied by the manufacturer.
6. The warranties cover materials only and the manufacturer does not assume any expense or
responsibility involved with the removal and/or reinstallation of any replacement parts.
The manufacturer's obligation under the warranties is expressly limited to, at the
manufacturer's option, replacement or repair of any defective part or component. The
manufacturer reserves the right to discontinue the model or models manufactured under
these warranties. Any discontinued parts or components may be replaced with an equivalent
part at the sole discretion of the manufacturer. The manufacturer is not responsible for
any color variation in the replacement part or component. The manufacturer is not
responsible for any window which has been modified in any manner to accommodate an alarm
system which may be attached to the product nor is it responsible for the reconnecting of
the window to the alarm system. The manufacturer reserves the right to inspect any and all
defects in the field. Field visitation(s) may result in service charges for non-warranty
site surveys.
7. Under no circumstances is the manufacturer liable for consequential, exemplary or
special damages including, but not limited to, damage or loss of other property or
equipment.
8. Some states do not allow limitations on how long an implied warranty lasts and/or the
exclusion or limitation of incidental or consequential damages, so the above limitations
may not apply to you. These warranties give you specific legal rights and you may also
have other rights which vary from state to state.
9. ELIGIBILITY REQUIREMENTS: Enforceability of the warranties set forth above are limited
to the Original Purchaser. The term "Original Purchaser" as used in the
warranties means:
That individual, individuals or entity which took original title to the premises or are
the original occupants of the structure in which the product was installed.
Any inquiry with respect to the product must be made in writing and include the Original
Purchaser's name, address, date of purchase, product information from the product label
and daytime as well as evening telephones numbers.
All claims and/or inquiries should be forwarded to the following address:
Silver Line Windows
Attn: Warranty/Registration Department
P.O. Box 6029
North Brunswick, New Jersey 08902-6029
10. NON-TRANSFERABILITY: The warranties described above are non-transferable and limited
to the Original Purchaser as described in Section 9 above.
11. If any part of the warranties described above are void or unenforceable in any State
of the United States, the remaining portions will nonetheless continue in full force and
effect.
** Please Note - Magbee
Contractors Supply provides this limited warranty as a reference only. This warranty is
offered solely by the manufacturer; terms and conditions apply. |
